Welcome to Würth Slowakia For trade customers only
Fixanchor internal thread W-FAZ-IG/S - pre-positioned installation - ANC-(W-FAZ/S-IG)-(A2K)-0-M8X62 Fixanchor internal thread W-FAZ-IG/S - pre-positioned installation - ANC-(W-FAZ/S-IG)-(A2K)-0-M8X62
Fixanchor internal thread W-FAZ-IG/S - pre-positioned installation - ANC-(W-FAZ/S-IG)-(A2K)-0-M8X62 - 1
Fixanchor internal thread W-FAZ-IG/S - pre-positioned installation - ANC-(W-FAZ/S-IG)-(A2K)-0-M8X62 - 2

Fixanchor internal thread W-FAZ-IG/S - pre-positioned installation

Fixanchor W-FAZ-IG pre-pos. install. steel zp
ANC-(W-FAZ/S-IG)-(A2K)-0-M8X62

Art.-no. 0904708110
EAN 4048539777112
All versions

Price for selected packaging unit
Fixanchor internal thread W-FAZ-IG/S - pre-positioned installation

Art.-no. 0904708110

Price for selected packaging unit
Quantity
PU
x 50 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Female thread bolt anchor for high loads in cracked and non-cracked concrete, ideal for a clean finish on the attached part. Zinc-plated steel
  • High load-bearing capacity, low centre to centre and edge clearance

  • Immediate load-bearing capacity – no waiting

  • Torque-controlled expanding anchor made from galvanised steel

  • Safe expansion in cracked concrete owing to fixing anchor cone with patented plastic coating

  • Countersunk screws ensure an elegant appearance for visible anchorages combined with high load-bearing capacity (e.g. railings)

  • Also suitable for temporary anchorages (cotter-pin installation, e.g. flexible stadium seating – flush with surface to eliminate risk of injury)
Proof of Performance
  • ETA-99/0011 for individual attachment, option 1, cracked and non-cracked concrete

  • Fire resistance: R30, R60, R90, R120; Technical Report TR020 (included in ETA-99/0011)
Notice
  • The W-FAZ-IG Fixanchor must be inserted using the appropriate approved setting tools (anchor system)

  • Hexagon head bolt, countersunk head screws, washers, countersunk washers and nuts have a special coating and are only admissible in the anchor system in accordance with ETA-99/0011. Therefore, please order these separately

  • Threaded rods may only be used if the conditions specified in approval ETA-99/0011 (material quality, dimensions, mechanical properties) are met

  • The torque required for anchorage can be applied with Würth torque wrenches and suitable attachments (open-end socket spanners)
Application area

Create the drill hole

Clean the drill hole

Knock in anchor with setting tool

Apply torque
Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Application area

Individual attachment with approval


Standard concrete C20/25 to C50/60 (cracked and non-cracked concrete)


E.g. metal structures, metal profiles, brackets, footplates, supports, cable conduits, pipes, railings, wooden structures, beams, stadium seating etc.



Individual attachment without approval


Can be used in concrete < C20/25 and compression-proof natural stone



May only be used in dry indoor areas

Metric anchor diameter

M8

Anchor length (l)

62 mm

Min. screw-in depth of threaded rod (Lsd)

12 mm

Material

Steel

Surface

Zinc plated

Nominal drill-bit diameter (d 0)

10 mm

Drill hole depth (h 1)

75 mm

Effective anchoring depth (h ef)

58 mm

Minimum edge distance
cracked concrete 		for s ≥ [mm] 75 100 100 120
Minimum edge distance
uncracked concrete 		115 155 170 210
Torque while installing anchor type S Tinst [Nm] 10 30 30 55
Torque while installing anchor type SK 10 25 40 50
Torque while installing anchor type B 8 25 30 45
Through hole in the attachment df ≥ [mm] 7 9 12 14
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Hexagon screw, type S/S — cotter-pin installation DIN 933 steel 8.8, zinc-plated blue
Hexagon screw, type S/S — cotter-pin installation DIN 933 steel 8.8, zinc-plated blue

SCR-HEX-F.ANC-WSH-(A2K)-SLIDCOAT-M8X25

With DIN EN ISO 7089 (DIN 125) zinc-plated blue steel washer for use with W-FAZ-IG/S Fixanchor
x 50 pcs
Countersunk screw, type SK/S — cotter-pin installation DIN 7991 (ISO 10462) steel grade 8.8, zinc plated blue, with countersunk washer, steel, zinc plated blue
Countersunk screw, type SK/S — cotter-pin installation DIN 7991 (ISO 10462) steel grade 8.8, zinc plated blue, with countersunk washer, steel, zinc plated blue

SCR-CS-F.ANC-WSH-(A2K)-SLIDCOAT-M8X30

For use with Fixanchor W-FAZ-IG/S
x 50 pcs
Hexagon nut, type B/S DIN 934 steel, zinc plated blue, with washer, in accordance with DIN EN ISO 7089 (DIN 125), steel, zinc plated blue
Hexagon nut, type B/S DIN 934 steel, zinc plated blue, with washer, in accordance with DIN EN ISO 7089 (DIN 125), steel, zinc plated blue

NUT-HEX-F.ANC-WSH-(A2K)-SLIDCOAT-M8

For use with Fixanchor W-FAZ-IG/S and threaded rod
x 50 pcs
Setting tool For Fixanchor W-FAZ-IG
Setting tool For Fixanchor W-FAZ-IG

STGTL-(F.FIXANC-W-FAZ-IG)-V-M8

For pre-positioned installation. For quick and convenient dropping in with the hammer drill
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Anchor rod sold by the meter zinc-plated steel
Anchor rod sold by the meter zinc-plated steel

ANC-(WIT-THRROD)-DIN976-B-8.8-M8X1000

For WIT injection systems in concrete and masonry
x 10 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details