Flat gasket For flat-sealing screw joints of heating and drinking water pipes
Flat gasket
FLSEAL-DN20
Register now and access more than 125,000 products
DVGW-certified
Simultaneous straining of the gasket with the maximum values for temperature and operating pressure is not possible. The specifications also depend on the medium, so they are therefore only guidelines.
Datasheets(X)
 | |
Material | Aramid fibre |
Colour | Grey |
DN nominal width | DN 20 |
Internal diameter (d1) | 20.0 mm |
Outer diameter (d2) | 30.0 mm |
Thickness (h) | 2.0 mm |
Min. temperature resistance | -50 °C |
Max. temperature resistance | 200 °C |
Max. operating pressure | 40 bar |
Approval mark | DVGW |
Last viewed
Pan head tapping screw with AW drive
Weld nut high profile WN 385 steel plain
Filling station connector with handle
Industrial wet and dry vacuum cleaner ISS 30-L AUTOMATIC
Connector DIN 7428 C 8.0 (5/16 in)
Auto-Messfix
Rear tool holder For workshop trolleys
Set stud with M6 thread
Double rabbet plane With dual cutting iron
Hexagonal bolt with flange EN 1665, steel 8.8, zinc-plated, thick-film passivated (ZSML)