HDPE UV fold masker
Cover film UV folded masker with adhesive strip
COVFLM-ADHSTR-UV-140CMX20M
Register now and access more than 125,000 products
UV-resistant
Can be removed residue-free within up to three weeks
Edge-adhering HDPE film
- Pre-folded
- Lightly embossed
- Charged with static electricity
Highly adhesive on paint
The paint will not run thanks to the embossed film.
Additional fixing element not required
The film clings to the surface due to the static electricity charge.
Bonding also possible on slightly soiled or slightly textured surfaces
- Adhesive edge not suitable for use on coated glass (e.g. tinted glass/self-tinting glass).
- Plastic surfaces with plasticisers and nitrate varnishes and precious metals may lead to residues. In these cases, a test application of 48 hours is recommended. Not suitable for porous or absorbent surfaces, e.g. porous natural stone, marble, granite, concrete and wood (non-painted). Discolouration may occur on these surfaces.
Datasheets(X)
The time-saving and compact 2-in-1 system can be used to provide temporary protection to many surfaces during painting and plaster work.
Substrate must be dry and free from grease and dust.
Unroll, affix the adhesive tape, cut, unfold the film
Adhesive tape backing material | PE-coated fabric |
Foil backing material | Polyethylene |
Adhesive base | Natural rubber |
Colour | Blue (base material), Transparent (film material) |
Length of roll | 20 m |
Width (opened out) | 140 cm |
Foil thickness | 0.01 mm |
Thickness of adhesive tape | 0.31 mm |
Adhesive force on steel (per unit of length) | 3.5 N/cm |
Elongation at break | 9 % |
Min./max. processing temperature | 5 to 40 °C |
Max. temperature resistance | 50 °C |
Moisture resistance | Yes |
Ultraviolet resistance | Yes |
Resistance against | Weather |
Max. usage duration | 3 Weeks |
Shelf life from production/conditions | 12 Month / at 20°C and 50% humidity |
Last viewed
Circlip, shaft DIN 471, steel plain, collated, standard design
Die holder DIN EN 22568 Performance
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
HSS DIN 338 SMART STEP twist drill bit
Sandpaper roll Useit® Superpad wood
Flat washer with chamfer ISO 7090, steel, 300 HV, zinc-nickel-plated silver (ZNSH)
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
System box separating element
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive