Hand cleansing gel
Hand cleansing gel
HNDCLNR-GEL-CITRUS-5LTR
Register now and access more than 125,000 products
The hand cleansers are personal-use products in liquid or semi-solid form for cleaning hands. Formulated to eliminate grease, oil, fuel oil, paints, and any type of dirt, acting gently on the skin and leaving it soft and smooth
Specific for dried dirt
Ideal for removing from hands: paint, enamel, tar, glues and resins
Specific raw materials
- contains abrasive microbeads and pumice stone, enriched with glycerol and sericin.
- the sericin aids regeneration of skin tissue, hydrating the skin at a deep level and protecting from external substances
with dispenser
Store in cool, dry and well ventilated area, at a temperature between 10 and 35°C. Store away from heat sources and direct sunlight. At temperatures below those recommended, the product can undergo a possible change in viscosity, a problem prevented by following the indications mentioned above
The technical advice given, while based on our best experience, should be considered, in any event, purely as guidance and should be confirmed by comprehensive practical tests. This does not eliminate the purchaser's
responsibility to personally test our products to see whether they are suitable for the intended use
Datasheets(X)
Apply directly the desired quantity of the product on the hands, rub to complete emulsion of dirt, then rinse thoroughly. In order to get the full benefit of the product, it is best not to wet the hands before cleansing and during rubbing
Contents | 5000 ml |
Smell/fragrance | Characteristic |
Colour | Orange |
Viscosity/consistency | Gel, thixotropic |
pH value | 6.7 |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain
Nylon Sanding Disc
Façade construction screw Faba® type A with hexagon head and sealing washer
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Long application nozzle for 310 ml plastic cartridges
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Welding burner
Hexagonal bolt with shank
Square wedge-shaped washer DIN 434, steel, hot-dip galvanised, wedged-shaped, for U section