Hexagon head bolt
ASME B18.2.1 steel GR5 zinc-plated UNF
SCR-HCS-GR5-(ZN)-5/8_18X2
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Standard thread tolerance in accordance with ASME B1.1 = 2A (for external thread)
Datasheets(X)
 | |
Nominal diameter (d1) | 5/8 in |
Length (l1) | 2 in |
Thread type | UNF |
Head height (k1) | 0.390 in |
External drive (s1) | WS15/16 |
Material | Steel |
Property class | GR5 |
Surface | Zinc plated |
Width across flats | 15/16 inch |
Other standard | 0 - not applicable |
Last viewed
MS 5000 screw-on lock
Double cylinder S5 locking system
TIME-SERT® threaded bushing
Raised countersunk head screw with H recessed head DIN 966, A4 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Clamping plate V For MacPherson spring strut compressor
Hand guard For angle grinders
Twist drill bit HSCo DIN 345 Type RN
Toothed trowel steel with wooden handle
Vehicle test tip For measuring leads