Insulation nail W-IN
Insulation nail W-IN 90mm
DWL-(W-IN)-PLA-D90MM-140-8X160
Register now and access more than 125,000 products
- High-quality PP
- Thermally stable from -40°C to +80°C
- Small drill hole diameter (8 mm)
- Quick, easy installation
- Low insertion depth, min. 20 mm — less time drilling
- Anchor without expansion nail
Drill the hole
Set anchor in place
Fasten insulation, knock in anchor until flush
Datasheets(X)
- For attaching insulation materials for façades with rear ventilation
- For attaching film, sealing membrane outside cellars
- Can be used in various solid surfaces, e.g. concrete, solid sand-lime brick, clay brick
- For attaching soft insulation materials that are not self-supporting, e.g. mineral wool or fibreglass
Anchor length (l) (l) | 160 mm |
Max. attachment height (d a) (da) | 140 mm |
Disc diameter | 90 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Embedding depth (h s) | 20 mm |
Drill hole depth (t) | 25 mm |
Material | PP - Polypropylene |
Halogen-free | Yes |
Last viewed
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Twist drill bit HSS DIN 338 type RN 118°
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A2-070 stainless steel, plain
Double ring ratchet wrench set 32 pieces
Bimetal saw blade HSS
Overlapping cover cap, for hexalobular socket and AW drive
ASSY® 3.0 zinc-plated yellow chipboard screw
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal nut, high profile with clamping piece (non-metal insert) DIN 982, steel 8, zinc-plated, blue passivated (A2K)
Impact tool Pin punches with pilots in accordance with DIN 6450