Interior trim clip type 1 suitable for oval holes
Interior trim clip, type 1
INTRMCLIP-MB-PLA
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | White |
Min./max. drill hole diameter | 7.5-7.7 mm |
Min./max. attachment thickness | 0.88-0.88 mm |
Head diameter | 13 mm |
Core diameter | 6 mm |
Grip range head | 2.5 mm |
Max. width | 18 mm |
Length below head | 12.7 mm |
Type of vehicle | Universal |
Corresponds to original spare part number | A0039884178 |
Last viewed
Staples for hand-held stapler and hammer tacker
Hammer-in anchor W-SD with internal thread
Extension arm for lever riveter HNG 26
Hexagonal bolt with threading up to head
Thin-walled heat-shrink hose Shrink rate 3:1, with internal adhesive
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A4 stainless steel, plain
Cetus trousers
Speed cutting disc For stainless steel
Cetus work dungarees