Light sheet metal rail Aluminium (EN-AW-6063 T6)
Sheet metal rail Light
SHTMETRL-SOL-ALU-TRAPEZE-25X80X3150MM
ZEBRA
Register now and access more than 125,000 products
- Not suitable for flat roof elevation mounting
- It should be ensured in advance that the sheet metal is sufficiently attached to the substructure. The maximum load-bearing capacity of the sheet metal should also be checked. Approval must be obtained from the manufacturer, particularly in the case of sandwich roofing elements. We recommend using ZEBRA® DBS® 4.5 x 25 thin sheet metal screws with sealing washer for attachment. The sheet metal rail must be pre-drilled with Ø 5.0 mm holes.
Datasheets(X)
 | |
Length | 3150 mm |
Height | 25 mm |
Width | 80 mm |
Material | Aluminium |
Last viewed
Cylindrical pin, hardened DIN 6325, steel, plain
Spring lock washer, shape B DIN 137, spring steel, plain, shape B crimped
Pocket slide calliper With top locking screw and flat depth gauge
Wing repair washer According to DIN 522, A4 stainless steel, plain
3/8 inch socket wrench insert metric, hexagon, short
Reversible blade For screwdriver with T-handle function
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Panel connector For tensile connections
ASSY® D
plug screw Pan head, without drill tip
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain