Lightweight concrete milling cutter
Blade for I-Block
BLDE-(I-BLOCK)-LCCTR-D53-2PCS
Register now and access more than 125,000 products
- Use possible in drills and cordless drills
- Easy through drilling
- Guided drill hole through centring pin
- Clean cutting edges thanks to taper tap
- Simple changing of the cutters
- Cutters available in many different diameters
Use breathing and eye protection
Datasheets(X)
Materials to be processed: I-Block 90, aerated concrete
- Hex. Mount for drill
- Insert cutters for the desired drilling diameter crosswise and screw in centring pin
- Mark centre point of the drilling on I-Block
- Settle centring pin on the drilling centre point mark and press in.
- Drilling without impact!
- Drill slowly until coating milled – afterwards the rotation speed can be increased.
- Even pressure when drilling through
Colour | Agate grey |
Diameter | 53 mm |
Last viewed
Universal protector W.TEC® COVER CAP WP 600 Polyethylene, red
Hexagonal bolt with flange DIN 6921, steel 8.8, zinc-plated, blue passivated (A2K)
Drilling stand DS Comfort
Slotted cheese head screw
Blind rivet, flat head
Crepe masking tape
Assembly glove Soft
Hexagonal nut, high profile with clamping piece (non-metal insert) DIN 982, steel 8, zinc-plated, blue passivated (A2K)
Wing nut, edged wing shape (American type) A2 stainless steel, plain
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)