Lock washer S Spring steel, plain
Plain spring steel type S
WSH-LOK-S-5,5X3,2X0,45
Register now and access more than 125,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases—primarily when using short screws and loads which are vertical to the screw axis—to prevent the connection loosening by using lock washers to supplement the pre-tensioning force.
Datasheets(X)
CAD data (available after login)
 | |
Internal diameter (d1) | 3.2 mm |
Outer diameter (d2) | 5.5 mm |
Height (h1) | 0.9 mm |
Thickness (s1) | 0.45 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Last viewed
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
Interchangeable cylinder cores for locking system MS 5000
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Carpet knife with slim, extremely robust metal handle
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Spare fuse For multimeter
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Mixer nozzle WIT-MX for Pure Epoxy WIT-PE 1000, Concrete Multi WIT-UH 300 and Pure Epoxy Basic WIT-PE 510 injection systems
Long-life & Speed diamond cup wheel for hard material
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)