Lock washer VS Spring steel, mechanically applied zinc coating
Spring steel zinc plated type VS
WSH-LOK-VS-(MZN)-9,0X5,3X0,9
Register now and access more than 125,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw thread | M5 |
Suitable for thread (imperial) | 3/16 inch |
Internal diameter (d1) | 5.3 mm |
Outer diameter (d2) | 9 mm |
Height (h1) | 1.3 mm |
Thickness (s1) | 0.9 mm |
Material | Spring steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | VS |
Last viewed
Fully threaded hexagonal bolt and nut
Workshop scheduler, three rows DIN A4
Slotted countersunk head screw DIN 963, steel 4.8, zinc-plated, blue passivated (A2K)
Rivet nut, multi-purpose, with countersunk head
HPC solid carbide drill Speeddrill 4.0-Universal, DIN 6537L, long 5xD, 4 drill heels, with internal cooling
Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess
Furnace putty 1000
SC long twist drill bit DIN 338
Sanding disc Useit Superpad vehicle
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)