Long-life diamond cutting disc for horticulture and landscaping For stationary saws/bench saws
Diamond cutting disc garden/landscaping TS
CUTDISC-DIA-LL-TSAW-GALA-BR30/25-D350MM
ZEBRA
Register now and access more than 125,000 products
- Particularly high segments: 15 mm
- Fan segments for better dissipation of heat and removal of dust in comparison with conventional segments
- Design 30/25.4 with additional sandwich carrier (with integrated copper foil) for a reduction in noise of up to 15 dB (subjective perception of the user: half of the noise level)
- Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds
- If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Cut larger workpiece cross-sections into several sections (swing cut)
- Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!
- Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
- Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
For dry and wet cutting
Diameter (Ø) | 350 mm |
Drill hole | 30 mm |
Reducing-ring internal diameter | 25.4 mm |
Segment height | 15 mm |
Segment thickness | 3.2 mm |
Number of segments | 24 PCS |
Segment connection | Laser |
Max. rotation speed | 5400 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Damping system For REDOSLIDE Z interior sliding door fitting
Hexagon nut with fine thread DIN 934, A4 stainless steel, plain
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
1/2" socket wrench insert For TX screws, short
Dry wall screw with coarse thread
Aerated concrete screw EUROFAST ® GBS-6
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Toothed trowel
FLEXEN® cold rubber plus 2 m hose, self-adhesive
Wing bolt, round wings DIN 316, malleable iron, zinc-plated, blue passivated (A2K)