MG III fire protection cement
Fire protection cement MG III
FPCMNT-A1-M3-25KG
Register now and access more than 125,000 products
- Seals off fire and flue gases, reduces temperature, seals off rooms, resistant to splash water and extinguishing water jets, mechanically stable
- Ready-to-use mixture
- Firm even at higher construction heights
Suitable for
- Pumps
- Presses
- Manual installation
To insulate ducts in walls and ceilings, always use A1 or A2 mineral wool in accordance with DIN 4102
with a melting point < 1,000 °C.
Datasheets(X)
For use in system [A], [B1], [F], [F2], F3, [G1], [G2], [H], [H1], [H2], [H3], [I]
- Combination partition [A]
- Cable box [B1]
- Pipe partition M, [F]
- Pipe partition M light, [F2]
- Pipe partition I plus/I iso, F3
- Pipe partition intumescent, [G1]
- Pipe partition dB, [G2]
- Pipe partition Z, [H]
- Pipe partition KL, [H1]
- Pipe partition intumescent mat plus, [H2]
- Pipe partition intumescent strip plus, [H3]
- Joint system K, [I]
- Seals wall and ceiling ducts for insulated and non-insulated non-flammable pipes.
- Can also be used to seal partitions with several ducts as there is no limit to pipe diameter or partition dimensions
- Seals wall and ceiling ducts for insulated and non-insulated plastic pipes with a diameter of < 32 mm without further measures.
Container | Sack |
Weight of content | 25 kg |
Colour | Grey |
Building material class | A1 - Non-flammable |
Chemical basis | Magnesium chloride |
Density | 1.392 kg/m³ |
Shelf life from production | 9 Month |
Conditions to maintain shelf life from production | dry storage area, 5°C to 25°C |
Building material class conditions | in accordance with DIN EN 13501-1 |
Last viewed
HSS annular cutter
Rivet nut with a small countersunk head and knurled shank
Connecting screw With sleeve
Small screwdriver slotted with pocket clip
System bolt for eccentric fitting 22
Open-end slugging wrench metric, straight
Drllng scrw, cnrsnk mllng hd, wndw cnstn
3/4-inch impact socket wrench insert hexagon, metric, short
Concealed hinge, Nexis click-on 125/-14 to -20 A
Compression cable lug DIN 46235