Machine setting tool
Mechanical setting tool for fixanchor
MECH-STGTL-(FIXANC-W-FAZ/W-FA)-(M8-M16)
Register now and access more than 125,000 products
Standard SDS-plus drive arbor for ease of use
Suitable for all Würth hammer drills with SDS-plus drive arbor
- Particularly suitable for economical bulk installations
- Even, optimum load transfer — minimal insertion effort
- Conical mount perfectly adapted to fixing bolt anchor's connecting thread for neat, central anchor insertion
- Reduced setting times
- Also ideal for overhead installation and for hard-to-reach attachments (e.g. railings/hanging pipes)
- High-quality steel guarantees long service life
Create the drill hole
10
Knock in anchor with mason's mallet or machine setting tool
Set anchor in place
Apply torque
| Usable anchors | ||
| Product description | Designation | Dimensions |
| 02.5 | Fixing bolt anchor W-FAZ/S | M8 - M16 |
| 02.6 | Fixing bolt anchor W-FAZ/A4 | M8 - M16 |
| 11.1 | Fixing bolt anchor W-FA/S | M8 - M16 |
| 11.1 | Fixing bolt anchor W-FA/hot-dip galvanized | M8 - M16 |
| 11.2 | Fixing bolt anchor W-FA/A4 | M8 - M16 |
| HCR anchors available by special order | ||
Datasheets(X)
- Can be used for anchor sizes M8 to M16
- Mount setting tool on Würth hammer drill with SDS-plus drive arbor
- Place setting tool mount on fixing bolt anchor thread and mechanically insert anchor into pre-drilled and cleaned drill hole
- Fix anchor by applying specified torque with torque spanner (see anchor product information)
Suitable for anchor diameter | 8 mm, 10 mm, 12 mm, 16 mm |
Last viewed
1" slider bar With pin detent
VDE side cutters, DIN ISO 5749 IEC 60900
Nozzle For cordless blind rivet gun
Screw handle spatula
Plastic gravity flow cup 0.6 litres
3-pin connector 6V - 24V
Reflector attachment For WGLG 100 self-igniting gas soldering device
Hand-lever grease gun For 400 g cartridges
Compartment separator For drawer cabinets
ORSY®BULL drawer box series 5