Mobile plastic upright distributor
Plastic-upright splitter
PWRDISTR-PLA-(4XSAFEPLG)
Register now and access more than 125,000 products
- 4 rubberised feet for secure placement
- Feet can be used to wind up connecting cable
- Impact and weather-resistant plastic housing
- Space-saving
When used in combination with upstream construction site power distribution points, types without residual current device (RCD) can be used. Protection against fault currents is then ensured by the built-in RCD on the supplying construction site power distribution point.
Datasheets(X)
- For indoor and outdoor use
- Portable socket distributors as a special supply point in accordance with DIN VDE 0100 Part 704 for connecting AC and three-phase power consumers on construction sites downstream of a connection distributor cabinet or a distributor/end distributor cabinet.
Output | Four shockproof sockets 16 A, 250 V |
Input | CEE 16 A, 5 pin, 400 V |
Cable type | H07RN-F5G2.5 mm² |
Cable length | 2 m |
Main fuse | Non secured |
Connected load | 11 kVA |
IP protection class | IP 44 |
Protection class | Protection class II/protective insulation |
Min./max. temperature conditions | -25 to 40 °C |
Material | PA - Polyamide |
Length x width x height | 250 x 250 x 245 mm |
Last viewed
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
ABS Lock III BE
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Halogen bulb
Straight metric VDE single open-end wrench
Ring screw DIN 580, steel C15E, plain
Double nipple for compressed air with cone
Double open-end wrench, ultra-thin
Table leg
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, plain