Movement detection paint
Tamper proof sealant
TAMPPROFSEAL-RED-50ML
Register now and access more than 125,000 products
High temperature resistance up to min. 145°C
Also suitable for outdoor use
High insulation resistance
As a covering for electrically conductive parts
High mechanical strength
But can still be removed
No corrosion
Good resistance to water, limited resistance to oil, petrol and diesel
Solvent and silicone-free
Practical accordion bottle
- Easy handling
- Better residue removal
- No clogging of the tip
Datasheets(X)
The screw retainer varnish is suitable for visually checking all possible movements between connected adjusted parts, and thus documents quality assurance, manufacturing control and product testing with a lacquer seal and protects against intrusion by third parties. The screw retainer varnish is applied to stud bolts, pressure fittings, nuts and other threaded connections once they have been properly pre-stressed and adjusted.
The product can also be used for masking electrically conductive parts to protect against corrosion and influence by touch.
And for colour-coding tools. For mechanics who often work in other workshops or who work together with several colleagues in a workshop.
The application surface must be clean, dry and free from grease. Apply/drip the paint directly onto the area to be secured.
For more information, please refer to the technical data sheet.
Colour | Flame red RAL 3000 |
Contents | 50 ml |
Density/conditions | 0.99 g/cm³ / at 20°C, 50% relative humidity |
Min. initial strength | 30 min |
Min./max. final strength | 12 h-24 h |
Min./max. processing temperature | 5 to 30 °C |
Min./max. temperature resistance | -40 to 145 °C |
Silicone-free | Yes |
Solvent-free | Yes |
Shelf life from production/conditions | 24 Month / cool and dry storage area, in sealed original container |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Vehicle cable round cable (hose line) FLRYY
Stamp
System connector SV 20 E, twin-pin
Hook and loop support plate
Washer system hose
C 6.3 PH bit (1/4 inch)
Interior trim clip, type S
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, zinc-plated blue passivated (A2K)
Bar handle For standard kitchen dimensions
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)