Multi maintenance oil
Maintenance oil multi
MAINTOIL-MULTI-400ML
Register now and access more than 125,000 products
Lubricates, cleans and protects
- Stops squeaking and creaking, and lubricates anything that is seized or jammed
- Cleans and protects plastic and metal parts, e.g. panels and housings
- Lubricates closures, hinges, bushings, chains and door locks
Removes rust and protects against corrosion
- Releases rusted metal parts
- Corrosion protection for metals and electrical assemblies
- Prevents lock cylinders and closures from freezing up
Gentle on materials
- Penetrates and displaces moisture around electrical and electronic systems
- Does not attack rubber, paint or plastic
Datasheets(X)
- For a wide range of applications in industry, trade and vehicle maintenance.
- Loosens rusted bolts, pipe fittings, screws, bolts, nuts, joints, Bowden cables, shafts, locks etc.
- Shake the can before use
- Spray parts and allow to take effect for a short time
- After using, spray the can upside down until it is empty
Contents | 0.4 l |
Chemical basis | Mineral oil |
Colour | Light yellow transparent |
Min./max. processing temperature for can | -10 to 40 °C |
Min./max. temperature conditions | -30 to 130 °C |
Shelf life from production | 24 Month |
Min. processing temperature for can | -10 °C |
Type of spray head | Standard spray head |
Max. processing temperature for can | 40 °C |
Min. temperature conditions | -30 °C |
Max. temperature conditions | 130 °C |
Min. flashing point | -80 °C |
Silicone-free | Yes |
Acid-free | Yes |
Resin-free | Yes |
AOX-free | Yes |
White oil-free/mineral oil-free | No |
VOC concentration (CH) | 76.57 g/l |
Kinematic oil basis viscosity | 30 cSt |
Material compatibility | NBR |
Conditions for viscosity of oil basis | at 40°C |
Container | Aerosol can |
Weight of content | 270 g |
Conditions to maintain shelf life from production | at 20°C |
Last viewed
Wood screw, DIN 95 brass Raised countersunk head, slotted
BoxSok™ bolt socket head
Malleable iron screw clamp with protective caps
1/4 inch socket wrench insert, metric short
Endless clamping strap Fully rounded edges
Collet chuck for flexible shaft
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 DIN 7990, steel 5.6, hot-dip galvanised (hdg)
S3 New Eco safety boot
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive