Nail HN 101 For use in steel and concrete substrates
Nail HN 101
NL-HN101-32MM
Register now and access more than 125,000 products
Nails with shaft lengths of 72, 90 and 100 mm must be pre-tapped into place with a hammer. Please observe the corresponding device category when selecting your fasteners
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shaft length
Length calculation for nails used on steel surfaces (min. 5 mm thick):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shaft length
Datasheets(X)
High-quality nail for steel substructures and concrete substrates (normal weight concrete ≥ C 12/15 ≤ C 50/60) in accordance with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Design | Smooth |
Shaft length (SL) | 32 mm |
Shank diameter (Øds) | 3.7 mm |
Head diameter (Ø dk) | 8 mm |
Suitable for device type | Würth BST 350 |
Last viewed
Single wire seal (SEAL) For uninsulated cable connector
Earth pipe clamp, copper For conductor cross-sections up to max. 16 mm²
System insert, plastic, 4.4.1
Combination wrench assortment, inch Short design, 12 pcs
Universal bolt for eccentric fitting
Vehicle cable FLRY
Cover cap for 3D hinges
Mudguard pincers
Dovetail milling cutter for wood With chink cutter
Retaining jaws Adjustable for wire stripping pliers