Nail HNS 107/30 In accordance with DIN EN 206
Nail HNS 107/30
NL-HNS107-DISC30MM-42MM
Register now and access more than 125,000 products
- Improved drive-in properties thanks to "loose" washer structure
- Large washer
- Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
- Length calculation for nails used on steel surfaces (min. 5 mm thick):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shank length
Please observe the corresponding device category when selecting your fasteners.
Datasheets(X)
 | |
Material of nail | Steel |
Surface of the nail | Zinc plated |
Material of washer | Steel |
Surface of the washer | Zinc plated |
Washer thickness | 1 mm |
Shaft length (SL) | 42 mm |
Shank diameter (Øds) | 3.7 mm |
Washer diameter (ØS) | 30 mm |
Head diameter (Ødk) | 8 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5 |
Last viewed
Eye bolt DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape B
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Flat blade fuse MINI-FLP Silver
Crimp cable lug, push connector Fully insulated polyamide
ORSY®BULL series 5 worktop
Twist drill bit HSCO DIN 338 type RN
Hexagonal bolt with flange in accordance with MBN standard
AW® bit
Rapid repair tape HR
Magno padlock With high bow