Nail sealing tape Butyl EURASOL®
EURASOL butyl nail sealing tape
NLSEALTPE-BUTYL-1X40MM-30M
EURASOL
Register now and access more than 125,000 products
Permanently elastic
Butyl is excellent at evening out small uneven areas on the surface.
Both sides are highly adhesive
Good adhesion on underlay membranes and wood.
Very good material compatibility
Quick to apply thanks to protruding release paper (lifts up with finger)
Excellent water and weathering resistance
EURASOL nail sealing tape is ideally suited for use with WÜTOP Trio and WÜTOP Trio Plus/SK. We therefore recommend using these underlay membranes.
Datasheets(X)
When fastening the securing battens on the rafters, nails or screws penetrate the underlay membrane or roof protective film. These points can lead to water entry with construction damage in case of rain. EURASOL butyl nail sealing tape seals reliably here, thereby protecting against damage and meeting the requirements of the ZVDH guideline. Also suitable for overlapping and connection bonded connections.
Apply EURASOL butyl nail sealing tape either on the underside of the securing battens or on the outside of the underlay membrane parallel to the rafter. Please note that the application surface must be dry and free of grease, dust and chips. The counter batten is then secured to the rafter.
Adhesive base | Synthetic natural rubber |
Colour | Grey |
Overall thickness | 1 mm |
Length | 30 m |
Width | 40 mm |
Ultraviolet resistance | 3 months, outdoor weathering |
Min. processing temperature | 5 °C |
Max. processing temperature | 35 °C |
Min. temperature resistance | -40 °C |
Max. temperature resistance | 90 °C |
Shelf life from production | 24 Month |
Conditions to maintain shelf life from production | at 20°C |
Last viewed
1/2 inch torque wrench With push-through square drive and fine-toothed ratchet head
Stainless anchor rod, product sold by metre A4 stainless steel
Short adapter Mini 13-pin to 7-pin 12V
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Nail anchor SHARK® Hammer TYPE GEW
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal nut with collar, 1.5xd high DIN 6331, steel 10, plain
Mudguard pincers
Clothes guard OBS For OBS 6/8 single-joint hinge, clip assembly
Centre-grooved dowel pins ISO 8742 steel zinc-plated