Non-slip hazard warning adhesive tape
HAZDWARNADHTPE-NONSLP-YELL/BLACK-75MMX6M
Art.-no. 081244 673
EAN 4056807861050
Register now and access more than 125,000 products
For light to medium traffic
- Withstands heavy foot traffic and light pallet truck traffic.
- R13 non-slip rating in accordance with DIN EN 16165.
- Meets the requirements of ASR A1.3, DIN 4844 or DIN EN ISO 7010.
Easy to apply
- Self-adhesive and easy to apply.
- Can be walked on immediately after applying.
- Can be torn off by hand.
Versatile application
- Helps prevent slip and fall accidents.
- Suitable for indoor and weather-protected outdoor areas.
- Ideal for production, warehousing and logistics (production areas, transport routes, stairs, ramps, platforms, tread plates and slip-prone zones on machines and vehicles)
- Can be used at both high and low temperatures.
Aluminium oxide abrasive firmly bonded to a PVC backing material with acrylic resin
- Durable and hard-wearing in daily use.
- Waterproof, chemical-resistant and mineral oil-resistant.
- Strong adhesive for a permanent hold.
Broad substrate compatibility
- Suitable for smooth concrete screed, EP/PU/MMA coatings and tiles.
- Yellow and black tape indicates permanent hazard points and obstacles
- Pivoting and turning on the tape by industrial trucks or other heavy vehicles should be avoided. This can damage the tape.
Datasheets(X)
The BASIC hazard warning adhesive tape is ideal for anti-slip floor marking in production areas, warehouses, stairways, traffic routes, and weather-protected outdoor areas, as well as for securing slip-prone zones on ramps, ladders, machines, and vehicles, effectively reducing slips, trips and falls.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. The use of butyl primer is also recommended on certain surfaces - particularly concrete and asphalt - and outdoors.
The hazard warning adhesive tape must be pressed firmly into place following installation to improve adhesion and durability. A press-on roller is particularly suitable for this purpose.
Colour | Yellow-black |
Material | PVC - Polyvinyl chloride |
Surface structure | Aluminium oxide grit |
Adhesive base | Acrylate |
Length | 6 m |
Width | 75 mm |
Thickness | 900 µm |
Min./max. processing temperature | 12 to 40 °C |
Min./max. temperature conditions | -15 to +70 °C |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Self-tapping thread insert with cutting slot
Diamond cutting disc for construction sites
Micro brush
K insulation pipe clamp with permanently integrated damping insert
WÜRTH MODYF Cetus EVO S3L safety shoe
WÜRTH MODYF STRETCH EVOLUTION hybrid jacket
Countersunk rivet DIN 661 aluminium
piasta self-drilling screw, hexagon head with sealing washer
Piston ring strap
MultiFit Latex protective glove