Non-slip mat
Non-slip mat grained pad
NONSLPMAT-PAD-RUBBER-BLACK-200X300X8MM
Register now and access more than 125,000 products
Fulfils the requirements according to VDI 2700 Blatt 15 and VDI 2700 Blatt 9
The Regupol® non-slip mats exceed this minimum requirement by 15–50% depending on the material pairing
Resistant to UV light, sodium chloride, fuels, etc.
Simple cleaning: shake out, vacuum, wash, and if necessary treat with high-pressure cleaner
- Time and material saving, as depending on dimensions, potentially 2 pallets can be secured against slipping using one pad
- Can be disposed of with household waste according to EAK waste code 070299 while observing local regulations
- Can also be used to prevent damage to goods or as decking mats
Loading surface must be swept clean to achieve good slip resistance.
Since external influences are difficult to calculate in practice (moisture, dirty loading surfaces etc.), we recommend that for our LASI calculator, art. 0990 120 009, you assume a friction coefficient of 0.6 µ when designing load securing.
Can be used several times before reaching legal discard state according to tests carried out by VDZ Dortmund.
The legal discard state is reached when tears, holes or crushing occurs, or there is contact with oils, fuels, chemicals etc.
Datasheets(X)
Suitable for | Heavy loads, Normal loads |
Min. friction | 0.6 µ |
Max. friction | 0.8 µ |
Material thickness | 8 mm |
Min./max. temperature conditions | -40 to 115 °C |
Material | Rubber granules chemically bound with PUR |
Colour | Black with green and yellow color particles |
Width | 300 mm |
Length | 200 mm |
Coating weight per m² | 6.88 kg |
Volumetric weight | 860 kg/m³ |
Min. elongation at break | 60 % |
Building material class/conditions | E - Normally inflammable / in accordance with DIN EN 13501-1 |
Last viewed
Twist drill bit HSS DIN 338 type RN 130°
Sensomatic assembly kit for top panel/bottom panel mounting
Full-extension slide Nova Pro soft-close
Filler VAKU 60
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
Sanding belt for tube belt sander
MacPherson spring strut compressor For MacPherson spring struts
Halogen bulb
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, A2 stainless steel, plain. With cross recess.
Hexagonal bolts, fully threaded, assortment