Nylon Sanding Fleece Roller
Nylon sanding fleece roller
SNDROLL-NYLFLC-100X100MM
Register now and access more than 125,000 products
Flexible, open fleece structure
- Ideal adjustment to workpiece geometry for optimum surface contact.
- Virtually no clogging due to surface abrasion
- Uniform and reproducible sanding results
- Reduced heat generation -> cool sanding
Even and consistent work results along with a clean, residue-free surface
Continuous exposure of fresh abrasive grain
Minimised risk of damaging workpiece surface or removing too much material
Easy to use grinding operation
No contamination of material surfaces
Free of corrosion-prone metals
Plastic support flanges can be removed in stages
19 mm location hole and 4x 6 mm wedge taper
The maximum permissible speeds may not be exceeded. Work only with appropriate protective equipment, such as safety glasses, gloves, hearing protection etc. Coarse cleaning sanding fleeces are not suitable for edge sanding. Therefore, only sand along and not against material edges! Observe operating instructions.
Datasheets(X)
- For universal use on virtually all materials. Especially for stainless steel, steel, non-ferrous metals, wood and plastic.
- Cleaning welding seams, metal surfaces, wood and plastic
- Removing discolouration, scale, rust, corrosion, dirt and oxide layers, coatings, paints, old brushed-on coatings, synthetic resins, adhesives, gasket residues and cement and concrete residues.
- Structuring, line matting, preparation and roughening up of surfaces
- Light deburring work
- Cleaning vehicle underbodies and for various other tasks in bodywork construction
Diameter | 100 mm |
Width | 100 mm |
Design | With wedge taper 6 mm |
Max. rotation speed | 4000 rpm |
Last viewed
Mid side bolt for eccentric fitting 22
Cone grease nipple shape A, straight DIN 71412, zinc-plated steel, shape A
Hammer drill bit Plus Duo-S Vario
Apparatus castor with fixed holder
Ratchet magazine screwdriver Vehicle/metal
Long sanding belt
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Type WX brad nail, zinc-plated steel, blue passivated (A2K)
Flat nose pliers DIN ISO 5745
WÜPOFAST® zinc-plated blue chipboard screw