PURlogic® Premiumpress 1-C foam gun
1C foam gun PURLOGIC PREMIUMpress
FMGUN-1C-(PURLOGIC-PREMIUMPRESS)
Register now and access more than 125,000 products
- Stop – No uncontrolled escaping of foam
- Ergonomic grip with rubber trim for safe and comfortable holding
- Foam dispensing quantity can be adjusted variably for a clean spraying pattern
- Conical nozzle, ideally suited for extension tips for slim joints
Datasheets(X)
The gun is used to apply 1-component polyurethane foam. All commercially available gun foams in aerosol spray cans with standard screw-on adapter are suitable. Being able to precisely adjust the PU foam quantity means that the gun is suitable for controlled dispensing and customised filling of joints, thereby enabling precise and secure installation.
Position the required flow of material with dispensing screw at the back of the gun: Turning in a clockwise direction reduces the foam output; turning in anti-clockwise direction increases the foam output. Check which setting gives you optimum results.
Material | Fibre glass |
Colour | Red, Black |
Product weight (per item) | 524.000 g |
Length | 350 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Push trolley With loading surface made of wooden plate (MDF) with beech effect
Hexagonal bolt with shank
Wire end ferrule with plastic sleeve
3D hinge dia. 16 mm With three bolts on the frame section
13-pin socket 12V With cut-off contact for rear fog light
Plastic pipe cutter
W-SLB system storage box
Piston ring pliers
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
FLEXEN® PE protective hose