Paint spray Special, clear lacquer
Clear lacquer, nitro-alkydal quality Special
CLRLACSPR-HIGHGLOSS-400ML
Register now and access more than 125,000 products
High-grade nitro-alkydal quality
- Quick drying
- Easy to apply
- Very good coverage properties
- Good coverage
Can be coated with all common primers, filler products and paint types
Quick-drying paint resin
Formula does not contain heavy metals
Drying time at 20°C
- Dust-dry< 10 min.
- Tack-free < 20 min.
- Touch dry < 60 min.
Temperature-resistant up to +80°C
Storage temperature +15°C to +25°C and up to 60% rel. humidity. Optimum processing temperature is +20°C. No painting on surfaces coated with synthetic resin lacquers, as this can lead to lifting and rippling of the old paint.
Datasheets(X)
Wide range of uses: Commercial vehicles, bodywork, radiators, window construction, steel construction etc. Recommended for repair work and parts painting. Solvent or water-based varnishes and sanded old varnishes are suitable surfaces.
Shake can vigorously for approx. 3 minutes before use. The application surface must be clean, dry and free from grease. Remove rust and old loose paint, sand and prime surface. Spraying distance: 20-25 cm. Maintain a flash-off time of approx. 5 minutes between spraying passes.
Chemical basis | Nitroalkydale |
Contents | 400 ml |
Colour | Transparent |
Gloss level | High gloss |
Design | Round nozzle |
Dust-drying time | 10 min |
AOX-free | Yes |
Min. flashing point | -4 °C |
Density | 0.75 g/cm³ |
Conditions to maintain shelf life from production | at 15°C to 25°C and max. 60% relative humidity |
Shelf life from production | 36 Month |
Last viewed
Lock washer DIN 127, steel, mechanically applied zinc coating
Fixanchor internal thread W-FAZ-IG/A4 - pre-positioned installation
Pneumatic hose reel DSA-S
Twist drill bit HSCo DIN 338 type RN oxide
Filling system Refillomat accessories
Weld nut high profile WN 385 steel plain
Cabinet corner
Bar handle, stainless steel
Tyre tread cutter blade, others
Fuse strip