Perfect zinc spray - ZNSPR-PERFECT-400ML

Perfect zinc spray

Name: Perfect zinc spray
Brand: Würth
SKU: 0893114113

Metal surface, zinc spray perfect
ZNSPR-PERFECT-400ML

Art.-no. 0893114113

EAN 4045989902606

All versions

Similar products

Price for selected packaging unit

Perfect zinc spray

Art.-no. 0893114113

Price for selected packaging unit

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

Outstanding long-term protection and optimum metal surface appearance

High layer thickness in first spray pass

High degree of safety thanks to optimum weathering protection

Minimum amount of time spent, as only one operation is required

Good coverage

Versatile use with adjustable spray head

Large area and minor repairs can be carried out quickly and reliably with the variable spray head.

High degree of resistance to running

High degree of wear resistance

Tested corrosion protection in accordance with DIN

Perfect zinc spray, light: 250 hours

Perfect zinc spray: 500 hours

Can be used for repairs in accordance with DIN EN ISO 1461

Spot weldable

Notice

Perfect zinc spray and Perfect light zinc spray contain zinc, and therefore offer optimum, active cathodic protection against corrosion. If the surface is damaged, the zinc coating sacrifices itself (sacrificial anode), thereby protecting the metal against rust. The remaining products protect the entire surface against rust. If the surface is damaged, the metal is no longer protected.

Not suitable as adhesive base for PU, MS polymer or hybrid sealing compounds.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For visual enhancement, repair and protection against corrosion of metallic surfaces.

Instructions

The application surface must be clean, dry and free from grease. Remove rust and old loose paint, then sand and clean. Shake can vigorously for at least 2 minutes before use.

Contents	400 ml
Chemical basis	Acrylic resin
Colour	Zinc
Gloss level	Matt
Min. curing time	1 h
Fully hardening/curing conditions	At recommended dry layer thickness
Resistance in salt-spray test	500 h
Max. temperature resistance	400 °C
Dust-drying time	5 min
Dry layer thickness (first back-and-forth motion)	40 µm
Conditions for dust-drying time	at recommended dry layer thickness
Purity rating zinc	99 %
Zinc content in the dry film	91.5 %
Zinc content in the paint	65 %
Coating thickness	40 µm
Recoatable/Can be painted over	Conditional, preliminary testing required
Grip strength conditions	at recommended dry layer thickness
Substrates with good adhesion	Steel, Zinc plated steel
Spot weldable	Yes
AOX-free	Yes
Cross-cut test	MAN 0-1
Min./max. grip strength	15-20 min
Cross-cut test conditions	in accordance with DIN 53151
Conditions for resistance in salt-spray test	in accordance with DIN 50021
Shelf life from production	36 Month
Conditions to maintain shelf life from production	at 10°C to 25°C
Min. flashing point	21 °C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 2

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Spare parts for this product:

Replacement spray head Variator for RAPID 2-component primer filler

SPRHD-F.PNTSPR-VARIATOR

Art.-no. 0891098

x 6 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).