Welcome to Würth Slowakia For trade customers only
Perforated angle bracket - PERFANGL-40X40X60MM Perforated angle bracket - PERFANGL-40X40X60MM Perforated angle bracket - PERFANGL-40X40X60MM
Perforated angle bracket - PERFANGL-40X40X60MM - 1
Perforated angle bracket - PERFANGL-40X40X60MM - 2
Perforated angle bracket - PERFANGL-40X40X60MM - 3

Perforated angle bracket

Perforated angle bracket
PERFANGL-40X40X60MM

Art.-no. 0681446250
EAN 4011231561105
All versions
Price for selected packaging unit
Perforated angle bracket

Art.-no. 0681446250

Price for selected packaging unit
Quantity
PU
x 100 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Perforated angle brackets are ideal for simple, intersecting wood/wood connections. For load-bearing connections with low load requirements.
  • Sheet metal hot-dip galvanised on both sides (DX51D + Z275 [approx. 20 µm]) in line with EN 10327:2004

  • Application in utilisation classes 1 and 2 in line with EN 1995:2013
Proof of Performance

ETA-09/216

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For load-bearing wood/wood joints with low load requirements in small structures.

Instructions

Suitable fasteners:


Comb/ribbed nail in line with EN 14592: 4.0x40 mm

Width x height

60 x 40 mm

Depth

40 mm

Thickness

2.5 mm

Hole diameter in subcarrier nJ/main carrier nH

5 / 5 mm

Number of holes in subcarrier nJ + main carrier nH

5 + 5 PCS

Approval

ETA-09/0216

Design

Without bar

Weight

83 g

Material

Steel

Material designation

DX51D

Material standard

DIN EN 10327:2004

Surface

Hot dip galvanized

Characteristic load-bearing capacity in kN of perforated angle bracket according to ETA-09/0216 with anchor nails - purlin/post
Perforated angle bracket Article number ETA Anchor nails in mm Perforated angle bracket per connection
F1,Rk F2/3,Rk F4,Rk F5,Rk
Width x length x depth in mm Wood Steel Wood Wood Steel Wood Steel
kN kN kN kN kN kN kN
1 perforated angle bracket3) 40x60x60x2.5 mm 0681 664 250 09/0216 4x40 1,76 1,66 3,14 --- --- --- ---
50x60x60x2.5 mm 0681 665 250 09/0216 4x40 1,17 1,48 2,08 --- --- --- ---
60x40x40x2.5 mm 0681 446 250 09/0216 4x40 1,46 1,66 2,51 --- --- --- ---
60x60x60x2.5 mm 0681 666 250 09/0216 4x40 1,76 1,66 3,17 --- --- --- ---
60x80x80x2.5 mm 0681 886 250 09/0216 4x40 1,90 1,66 4,22 --- --- --- ---
80x80x80x2.5 mm 0681 888 250 09/0216 4x40 2,53 2,21 7,98 --- --- --- ---
100x60x60x2.5 mm 0681 661 250 09/0216 4x60 3,30 2,77 7,76 --- --- --- ---
100x100x100x2.5 mm 0681 111 250 09/0216 4x60 2,93 2,77 10,82 --- --- --- ---
2 perforated angle brackets 40x60x60x2.5 mm 0681 664 250 09/0216 4x40 3,52 3,32 6,29 10,6 3,51 10,6 3,51
50x60x60x2.5 mm 0681 665 250 09/0216 4x40 2,35 2,95 4,16 5,73 3,61 5,73 3,61
60x40x40x2.5 mm 0681 446 250 09/0216 4x40 2,93 3,32 5,02 7,82 4,06 7,82 4,06
60x60x60x2.5 mm 0681 666 250 09/0216 4x40 3,52 3,32 6,34 7,75 4,29 7,75 4,29
60x80x80x2.5 mm 0681 886 250 09/0216 4x40 3,80 3,32 8,43 8,04 4,58 8,04 4,58
80x80x80x2.5 mm 0681 888 250 09/0216 4x40 5,06 4,43 16,00 10,8 6,08 10,8 6,08
100x60x60x2.5 mm 0681 661 250 09/0216 4x60 5,87 5,53 21,60 13,1 7,2 13,1 7,2
100x100x100x2.5 mm 0681 111 250 09/0216 4x60 6,60 5,53 15,50 14,8 7,48 14,8 7,48
3) If one angle bracket is used for each connection, the connected component must be secured against twisting.
4) The loads F4 and F5 act on the top edge of the connected component. Securing against twisting is not required.
The specified load-bearing capacities apply to softwood at 350 kg/m³ ≤Ƥk ≤420 kg/m³.
For wood at 290 kg/m³ ≤rk≤ 350 kg/m³, the specified load-bearing capacities for wood must be multiplied by the factor kdens:

tSteel ≥ 2.5 mm: kdens = (pk/350)^2

tSteel = 1.5 mm: kdens = (pk/350)^0.8

Design values of load-bearing capacities: Fi,Rd = min {Fi,wood,Rd; Fi,steel,Rd}
Failure of fasteners in wood: Fi,wood,Rd = kmod/ƳM,wood × Fi,wood,Rk with ƳM,wood = 1.3
Steel failure of the connector: Fi,steel,Rd = Fi,steel,Rk/ƳM,steel with ƳM,steel = 1.25
For several simultaneously acting loads, the following condition must be met:



The specified nailing patterns must be observed in accordance with the relevant ETA.
NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Comb nail / anchor nail
Comb nail / anchor nail

RIDGNL-(A3K)-4X40MM

Galvanised steel, blue coated (A2K)
x 3000 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details