Perforated angle bracket - PERFANGL-60X60X40MM

Perforated angle bracket - PERFANGL-60X60X40MM - 1

Perforated angle bracket

Name: Perforated angle bracket
Brand: Würth
SKU: 0681664250

Perforated angle bracket
PERFANGL-60X60X40MM

Art.-no. 0681664250

EAN 4011231561204

All versions

Price for selected packaging unit

Perforated angle bracket

Art.-no. 0681664250

Price for selected packaging unit

Quantity

x 100 pcs

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

Specification

Perforated angle brackets are ideal for simple, intersecting wood/wood connections. For load-bearing connections with low load requirements.

Sheet metal hot-dip galvanised on both sides (DX51D + Z275 [approx. 20 µm]) in line with EN 10327:2004

Application in utilisation classes 1 and 2 in line with EN 1995:2013

Proof of Performance

ETA-09/216

Application

Application area

For load-bearing wood/wood joints with low load requirements in small structures.

Instructions

Suitable fasteners:

Comb/ribbed nail in line with EN 14592: 4.0x40 mm

Technical information


Width x height	40 x 60 mm
Depth	60 mm
Thickness	2.5 mm
Hole diameter in subcarrier nJ/main carrier nH	5 / 5 mm
Number of holes in subcarrier nJ + main carrier nH	4 + 5 PCS
Approval	ETA-09/0216
Design	Without bar
Weight	84 g
Material	Steel
Material designation	DX51D
Material standard	DIN EN 10327:2004
Surface	Hot dip galvanized

Characteristic load-bearing capacity in kN of perforated angle bracket according to ETA-09/0216 with anchor nails - purlin/post
Perforated angle bracket		Article number	ETA	Anchor nails in mm	Perforated angle bracket per connection
Perforated angle bracket					F_1,Rk		F_2/3,Rk	F_4,Rk		F_5,Rk
Width x length x depth in mm					Wood	Steel	Wood	Wood	Steel	Wood	Steel
Width x length x depth in mm					kN	kN	kN	kN	kN	kN	kN
1 perforated angle bracket³⁾	40x60x60x2.5 mm	0681 664 250	09/0216	4x40	1,76	1,66	3,14	---	---	---	---
	50x60x60x2.5 mm	0681 665 250	09/0216	4x40	1,17	1,48	2,08	---	---	---	---
	60x40x40x2.5 mm	0681 446 250	09/0216	4x40	1,46	1,66	2,51	---	---	---	---
	60x60x60x2.5 mm	0681 666 250	09/0216	4x40	1,76	1,66	3,17	---	---	---	---
	60x80x80x2.5 mm	0681 886 250	09/0216	4x40	1,90	1,66	4,22	---	---	---	---
	80x80x80x2.5 mm	0681 888 250	09/0216	4x40	2,53	2,21	7,98	---	---	---	---
	100x60x60x2.5 mm	0681 661 250	09/0216	4x60	3,30	2,77	7,76	---	---	---	---
	100x100x100x2.5 mm	0681 111 250	09/0216	4x60	2,93	2,77	10,82	---	---	---	---
2 perforated angle brackets	40x60x60x2.5 mm	0681 664 250	09/0216	4x40	3,52	3,32	6,29	10,6	3,51	10,6	3,51
	50x60x60x2.5 mm	0681 665 250	09/0216	4x40	2,35	2,95	4,16	5,73	3,61	5,73	3,61
	60x40x40x2.5 mm	0681 446 250	09/0216	4x40	2,93	3,32	5,02	7,82	4,06	7,82	4,06
	60x60x60x2.5 mm	0681 666 250	09/0216	4x40	3,52	3,32	6,34	7,75	4,29	7,75	4,29
	60x80x80x2.5 mm	0681 886 250	09/0216	4x40	3,80	3,32	8,43	8,04	4,58	8,04	4,58
	80x80x80x2.5 mm	0681 888 250	09/0216	4x40	5,06	4,43	16,00	10,8	6,08	10,8	6,08
	100x60x60x2.5 mm	0681 661 250	09/0216	4x60	5,87	5,53	21,60	13,1	7,2	13,1	7,2
	100x100x100x2.5 mm	0681 111 250	09/0216	4x60	6,60	5,53	15,50	14,8	7,48	14,8	7,48
³⁾ If one angle bracket is used for each connection, the connected component must be secured against torsion. ⁴⁾ The loads F4 and F5 act on the top edge of the connected component. It is not necessary to secure the component against torsion. The specified load capacities apply to softwood at 350 kg/m³ ≤ Ƥ_k ≤420 kg/m³. For wood at 290 kg/m³ ≤ Rk ≤ 350 kg/m³, the specified load capacities for wood must be multiplied by the factor kdens: tSteel ≥ 2.5 mm: k_dens = (pk/350)^2 tSteel = 1.5 mm: k_dens = (pk/350)^0.8 Design values of load capacities: F_i,Rd= min {F_i,wood,Rd; F_i,steel,Rd} Failure of fasteners in wood: F_i,wood,Rd= k_mod/Ƴ_M,wood × F_i,wood,Rkwith Ƴ_M,wood = 1.3 Steel failure of the connector: F_i,steel,Rd = F_i,steel,Rk/Ƴ_M,steel with Ƴ_M,steel = 1.25 For several simultaneously acting loads, the following condition must be met: The specified nailing patterns must be used in accordance with the relevant ETA.
NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Documents

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Accessory

Required accessory:

Product

Description

Quantity

Price
/PU

Comb nail / anchor nail

RIDGNL-(A3K)-4X40MM

Art.-no. 0681940040

Galvanised steel, blue coated (A2K)

x 3000 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).