Perforated sleeve WIT-SH WIT-SH for ALLROUNDER WIT-VM 250 injection systems
Perforated sleeve WIT-SH
ANC-(WIT-SH)-PLA-12X50
Register now and access more than 125,000 products
Masonry individual attachment (system with perforated sleeve WIT-SH):
- ALLROUNDER chemical injection mortar WIT-VM 250, anchor rod WIT-AS, female thread sleeve WIT-IG
- Required for anchoring in perforated brick masonry and aerated concrete (only WIT-SH 18x95)
- The anchor rods (WIT-AS) or female thread sleeves (WIT-IG) will be held centrally in the perforated sleeve during mounting
- The perforated sleeve barbs keep the perforated sleeve or anchor rod (short dimensions) from falling out during mounting — overhead mounting
Datasheets(X)
CAD data (available after login)
Type description | WIT-SH 12/50 |
Diameter | 12 mm |
Length | 50 mm |
Material | Plastic |
Nominal drill-bit diameter (d 0) | 12 mm |
Drill hole depth (h 0) | 55 mm |
Effective anchoring depth (h ef) | 50 mm |
Suitable for anchor rod | WIT-AS M6/50, WIT-AS M8/50 |
Required injection mortar | WIT-VM 250 |
Approval | ETA-13/1040 |
Last viewed
Twist drill bit HSCo DIN 1869 R1 type RN
Universal holder E 6.3 (1/4") With stainless steel sleeve, snap ring and permanent magnet
1/2" multi-socket wrench one tool for all applications
Hook-and-loop fabric discs Dia. 115 mm
2-pin socket 6V - 24V
13-pin socket 12V With cut-off contact for rear fog light
Turnbuckle with eyelets DIN 1480, steel, zinc-plated, blue passivated (A2K)
Standard cable tie with plastic latch
Mounting bracket
Hook Nail