Plastic T-connector
Plastic T-plug-in connectors
QCKPLGCON-(T-CON)-PLA-D8MM
Register now and access more than 125,000 products
- Operating temperature: -20°C to +80°C
- Permissible operating pressure max. 20 bar
Above a certain length, pipes "vibrate", irrespective of whether they are made of steel, copper or plastic. Therefore, all pipes should be secured on the body or on the frame using pipe clamps, rubberised if possible, wherein the distance should be 1 m and must not exceed 1.20 m.
Datasheets(X)
Suitable for plastic hoses of different material qualities. Not for brake systems, only for secondary consumers.
Installation:
Insert polyamide pipe into the quick-fit plug while overcoming slight resistance of the O-ring and pressing in pipe as far as it will go
Dismantling:
Press clamping ring against connection and pull out pipe
 | |
Outer diameter of pipe (D1) | 8 mm |
Outer diameter (G) | 13.5 mm |
Distance from centre of pipe to end of T-piece (L/2) | 23 mm |
Length (L) | 46 mm |
Height (H) | 29.5 mm |
Max. operating pressure | 20 bar |
Material of gasket | Nitrile |
Material | Plastic |
Material of serrated washer | Stainless steel |
Min./max. temperature conditions | -20 to 80 °C |
Last viewed
ROCKWOOL 800
Powdered chalk
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Mobile stop clamp
Multi-pocket jeans
Packing tape dispenser
STARLINE® Plus trousers
Hinge pin For shutter hinges
Flexcomfort protective glove
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537K, 3xD short, 4 drill heels, with internal cooling