Plastic frame anchor W-UR 6 SymCon<SUP>®</SUP> - ANC-(W-UR SYM)-PLA-AW20-(A2K)-30-6X80

Plastic frame anchor W-UR 6 SymCon<SUP>®</SUP> - ANC-(W-UR SYM)-PLA-AW20-(A2K)-30-6X80 - 1

Plastic frame anchor W-UR 6 SymCon^®

Name: Plastic frame anchor W-UR 6 SymCon ®
Brand: Würth
SKU: 0912806403

Plastic frame anchor, W-UR 6 SymCon, cntrsnk. head
ANC-(W-UR SYM)-PLA-AW20-(A2K)-30-6X80
ZEBRA

Art.-no. 0912806403

EAN 4050642732803

All versions

Similar products

Price for selected packaging unit

Plastic frame anchor W-UR 6 SymCon^®

Art.-no. 0912806403

Price for selected packaging unit

Quantity

x 100 pcs

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

The first 6-series plastic anchor with ETA for multiple attachment in concrete. With pre-assembled countersunk head screw made of zinc plated steel

Reliable post-spreading characteristics

Enabled by geometry of the SymCon plug screw

Increased load introduction

Screwing in the SymCon screw results in optimum compression of the plastic of the wall plug body (almost no back-cut)

Improved load transfer

Even, continuous load distribution across the entire expansion area

Low assembly workload

Pre-assembled wall plug body and special screw

The hammer-in stop prevents premature expansion of the anchor during installation

Anchorage via friction locking between wall plug body and anchoring base

The wall plug body is made of high-quality polyamide

Proof of Performance

W-UR 6 SymCon and W-UR F 6 SymCon (galvanised steel): European Technical Approval ETA-11/0309.

The anchor has European Technical Approval for use in multiple attachment of non-load-bearing systems (e.g. suspended ceilings etc.).

Anchoring base with approval: Standard concrete ≥ C12/15

Anchoring bases without approval: Solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, hollow lightweight concrete blocks, solid bricks and blocks made of lightweight concrete

Installation temperatures: Temperature of anchoring base:≥ –20°C Temperature of wall plug body:≥ 0°C

Notice

Drill cuttings must be removed from the drill hole.

Application area

Create the drill hole

Clean the drill hole

Set anchor and screw

Screw in the screw

Screw in screw until flush

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

Suitable for attaching ceiling substructures (made of wood or steel), wooden laths, metal rails, suspended ceilings, angle brackets, profiles etc.

Anchor diameter	6 mm
Anchor length (l)	80 mm
Nominal drill-bit diameter (d 0)	6 mm
Through-hole in the component to be connected (d f)	6.5 mm
Material of screw	Steel
Internal drive	AW20
Surface of the screw	Zinc plated
Drill hole depth (h 1)	60 mm
Approval	ETA-11/0309
Type description	W-UR 6 SymCon, countersunk head screw

Performance data: Concrete, multiple attachment of non-load-bearing systems
Anchor diameter		[mm]	W-UR 6 SymCon
Embedment depth of the anchor sleeve		h_nom[mm]	50
Centric tension load¹⁾ for individual anchors or an anchor group	N_perm = C12/15 [kN]	30°C²⁾/50°C³⁾	0,79
	N_perm ≥ C16/20 [kN]	30°C²⁾/50°C³⁾	0,79
Shear load¹⁾ for individual anchors or an anchor group	V_perm	[kN]	2,05
Minimum member thickness	h_min	[mm]	90
Minimum axis distance⁴⁾	s_min [mm]	C12/15	60
Minimum axis distance⁴⁾	s_min [mm]	≥ C16/20	40
Minimum edge distance⁴⁾	c_min [mm]	C12/15	60
Minimum edge distance⁴⁾	c_min [mm]	≥ C16/20	40
Characteristic edge distance	c_cr,N [mm]	C12/15	60
Characteristic edge distance	c_cr,N [mm]	≥ C16/20	40
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the effects of γ_F = 1.4 have been taken into account. For the combination of tensile and transverse loads, please refer to ETAG 020 Appendix C. ²⁾ Maximum long-term temperature. ³⁾ Maximum short-term temperature. ⁴⁾ The permissible load must be reduced.

Installation parameters: Concrete
Anchor diameter [mm]		W-UR 6 SymCon
Nominal drill diameter	d₀ [mm]	6
Drill cutting dia.	d_cut ≤ [mm]	6,4
Drill hole depth	h₁ ≥ [mm]	60
Embedment depth of the anchor sleeve	h_nom [mm]	50
Through hole in the attachment	d_f ≤ [mm]	6,5

Additional accessory:

Product

Description

Quantity

Price
/PU

Blow-out bulb for drill hole cleaning

BLWOUTBULB-F.CLN

Art.-no. 0903990003

For cleaning drill holes with a smaller diameter

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).