Plastic sheet metal nut, type 1
Plastic sheet-metal nut, type 1
MP-OPEL-NUT-PLA-GREEN
Register now and access more than 125,000 products
Extremely secure attachment
To obtain optimal assembly conditions, the screw thread should be at least as long as the height of the plastic nut.
Datasheets(X)
- Attachment of sheet metal with a thickness of 0.5–5.0 mm
- Screwing with plastic-compatible screws e.g. WÜPLAST®
Suitable for screw | Diameter 5.0 mm |
Length | 16.00 mm |
Width | 12.00 mm |
Min./max. attachment thickness | 1.50-2.00 mm |
Distance between centre of hole and edge | 8.50 mm |
Drill hole diameter | 7.00 mm |
Material | PP - Polypropylene |
Colour | Green |
Corresponds to original spare part number | 1235884 |
Corresponds to original spare part number 2 | 24417039 |
Last viewed
Engine crank alignment tool For Mercedes and MAN
Engine crank alignment tool For MB Actros/Atego and MAN
Second handle Suitable for use in the DS 180 core drill
Vehicle cable round cable (hose line) FLRYY
Flat connector contact Junior Power Timer (JPT) 2.8
Water/dust collection ring For tile drill NDS 68
Eccentric fitting Without collar
HSS SMART STEP Deepcut stepped twist drill bit
Diamond Cup Wheel for Hard Material
Oil stain remover