Post support bracket ProBase type C Top
Post support bracket A-CO-H/ZN-NI
POSTHOLD-A-CO-H-(ZNNI)-L130CTOP
Register now and access more than 125,000 products
- Very high load capacities in all load directions
- Optimised angled screw fitting with system screws 8 x 160 mm zinc-nickel prevents splitting of the wood
- Height adjustment possible under full load
- Simplified and precise installation due to centring point
CE labelling as per European Technical Assessment ETA-15/0540
Datasheets(X)
Load-bearing connection, for the highest loads in timber constructions between supports and substrate
 | |
Design | For static purposes |
Number of D 13 mm holes | 3 PCS |
Unextended height | 150 mm |
Min./max. height (H) | 150-200 mm |
Characteristic load-carrying capacity of pressure | 129 kN |
Characteristic load-carrying capacity of transverse load | 4.28 kN |
Characteristic load-carrying capacity of tension | 40.2 kN |
Suitable for min. post cross-section | 121 x 120 mm |
Approval | ETA |
Material | Steel |
Surface | Zinc nickel |
Weight | 1600 g |
| Technical information | ||
Last viewed
Centre drill bit
Half-head strip nail, 34°, with smooth shaft Steel, zinc-plated yellow (A4C), free from chromium VI
Lock with key
Façade construction screw Faba® type BZ with hexagon head and sealing washer
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
HSS annular cutter
Office container fitting set OrgaAer
Plain washers, large series ISO 7093-1 polyamide 6.6 natural
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m