Primer for superglues
Primer for superglue
PRIM-SUPGLU-50ML
Register now and access more than 125,000 products
Caution: In case of combination bonding with different materials, only the non-polar surface may be primed
Datasheets(X)
The primer is used to improve adhesion to materials that are difficult to bond
The primer can be applied to the surface using absorbent material (e.g. a small sponge) or brushes as appropriate. Parts can also be immersed or sprayed.
The solvent must be completely flashed off before the adhesive is applied!
For more information, please refer to the technical data sheet.
Chemical basis | Aliphatic solvent |
Colour | Transparent |
Density | 0.68 g/cm³ |
Min. flashing point | -10 °C |
Shelf life from production/conditions | 24 Month / at room temperature |
Contents | 50 ml |
Last viewed
Feather key, high profile DIN 6885, A4 stainless steel, plain, shape A
Alpha square For carpenters, formwork setters and staircase builders
Superglue Klebfix Easy Pen
pias® drilling screw, countersunk head with AW drive
T70 battery-powered LED torch With Morse code button and holding magnet
Interchangeable cylinder cores for locking system MS 5000
ASSY® 3.0 SK timber screw
Round head screw with square neck DIN 603, A2 stainless steel, plain
Punch for trapezoidal hole punch
Tensioning washer DIN 6796, phosphated steel