Primer for superglues
Primer for superglue
PRIM-SUPGLU-50ML
Register now and access more than 125,000 products
Caution: In case of combination bonding with different materials, only the non-polar surface may be primed
Datasheets(X)
The primer is used to improve adhesion to materials that are difficult to bond
The primer can be applied to the surface using absorbent material (e.g. a small sponge) or brushes as appropriate. Parts can also be immersed or sprayed.
The solvent must be completely flashed off before the adhesive is applied!
For more information, please refer to the technical data sheet.
Chemical basis | Aliphatic solvent |
Colour | Transparent |
Density | 0.68 g/cm³ |
Min. flashing point | -10 °C |
Shelf life from production/conditions | 24 Month / at room temperature |
Contents | 50 ml |
Last viewed
Special pliers For cable ties, stainless steel AISI 304 with ball lock
1/2" socket wrench insert metric, bi-hex, short
DUO-S impact drill bit with straight shank
Cartridge Adjustable for wire stripping pliers
Blank key For MS 5000 interchangeable cylinder core
Double securing shackle FIXB 227 With pre-assembled 27 mm nail type HN 101
Blind rivet, flat head
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
MFD-S multi-purpose drill bit with straight shank
CLL-A universal bracket