Radiator cleaner
Radiator cleaner
RADCLNR-250ML
Register now and access more than 125,000 products
Removes corrosion and sludge deposits in the cooling circuit
Increased operational reliability due to clean cooling system.
Neutralises lime residues
New coolant is protected from contamination by old dirt residues.
Compatible with anti-freeze
Alkaline in pH range of 9–11
Compatible with all materials used to build the radiator.
Removes deposits in the cooling circuit and cleans the cooling system of contamination. For instance, oil residues caused by damage to the cylinder heads can be removed. The radiator cleaner can also be used as a preventative measure every time the coolant is changed.
250 ml is sufficient for 10 litres of cooling water. 1000 ml is sufficient for 40 litres of cooling water.
The cleaner is not suitable for vehicle operation.
Datasheets(X)
For rectifying reduced cooling performance during radiator repairs and maintenance work on the cooling system.
Add the contents of the can to the cooling water. Open the heater valves. Run the engine at operating temperature for approx. 30 minutes. Deposits that have been dislodged by the radiator cleaner must be flushed away with water. The flushing process can be carried out without removing the thermostat. It is recommended that parts that have been affected by oil ingress, such as the expansion tank and water hoses, be replaced. Refill the cooling system after cleaning, bleed and check for leaks.
Contents | 250 ml |
Colour | Yellow |
Smell/fragrance | Mild |
Chemical basis | Water |
Density | 1.023 g/cm³ |
Density conditions | at 20°C |
Shelf life from production | 24 Month |
Last viewed
1/4" socket wrench insert, inch short
Order protector with rip-tape and hinge
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Façade construction screw Faba® type A with hexagon head and sealing washer
Fixanchor W-FAZ/S
Lamella flap disc Flexi-Disc
Double securing shackle FIXB 227 With pre-assembled 27 mm nail type HN 101
Metric double box-end wrench with POWERDRIV®
Screw hook with cross recess
Hexagonal bolt with shank