Radiator sealant For all engines with cooling systems without filter systems
Radiator seal
CLSEAL-300ML
Register now and access more than 125,000 products
Permanently seals hairline cracks and leaks
Secures the function of the cooling system against water loss.
Prevents loss of cooling water
Protects against damage to the engine.
Does not affect the materials used in the radiator construction
Does not attack rubber or plastic parts.
Radiator sealant must not be used if the cooling system is equipped with a dirt strainer.
Datasheets(X)
Seals hairline cracks in radiator, engine block or cylinder head. Leaking hose connections can also be sealed. Permanent sealing of hairline cracks and leakage points protects the cooling circuit and combustion chamber from leaks. Radiator sealant prevents loss of coolant.
Shake the can well before use. Add the contents of the can to the warm cooling system. Open the radiator valves and let the engine run for at least 10 minutes. Check the coolant level and leak tightness again. In trucks, use a mixing ratio of maximum 1:100.
Contents | 300 ml |
Colour | Green, Blue |
Smell/fragrance | Fruity |
Chemical basis | Ethylene glycol |
Density | 1.01 g/cm³ |
Density conditions | at 20°C |
pH value | 9.76 |
Shelf life from production | 24 Month |
Last viewed
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 10.9, plain
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Wing screw, square wings Similar to DIN 316, A2 stainless steel, plain
Union nipple
Pull handle ST/A100
Anchor plate ASS 55
Basic sweatshirt
Compression cable lug DIN 46235
Façade construction screw Faba® type A with hexagon head and sealing washer