Rapid SML connector
SML connector, Rapid
CON-SML-RAPID-DN50
Register now and access more than 125,000 products
Fast, safe connection with only one screw-in nut
Simple mounting of the connector thanks to pre-mounted, slip-proof EPDM sealing insert
Closing of connector with simple Allen screw size 6 / size 8
No torque wrench or special tools required
Pre-assembly of pipes and moulded parts requires no effort due to powerful clamping effect
No tightening torque required, as block tightening is used (both clamping jaws must strike each other)
Datasheets(X)
CAD data (available after login)
For building drainage
 | |
DN nominal width (∅D) | DN 50 |
Width across flats | 6 mm |
Material of sealing ring | Ethylene propylene diene terpolymer rubber EPDM |
Material of sheet-metal ring covering | Chrome steel |
Material of fastener | Steel |
Operating pressure | 0.5 bar |
Internal drive | HS6 |
Min. temperature resistance | -10 °C |
Max. temperature resistance | 95 °C |
Height (H) | 80 mm |
Width (BM) | 40 mm |
Thread type | Metric thread |
Resistance against | Aging, Ozone, Weather |
Outer diameter | 70 mm |
Nominal diameter | 8 mm |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Mounting tweezers X-cut, rounded tips
Expanding nut, type 1 suitable for round holes
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Ring bolt DIN 580, material: C15 E, zinc-plated steel, blue passivated (A2K)
Sidewall lining
Countersunk screw, type SK/A4 — cotter-pin installation DIN 7991 (ISO 10462) A4 stainless steel, with countersunk washer, A4 stainless steel
Fully threaded hexagonal bolt and fine thread
Spacer washer
OrgaAer hanging frame Unit width: 800 mm