Reinforced clamping lever with female thread
Clamping lever, steel, female thread, reinforced
CLMPLEVR-IT-ST-RFCD-M6X49
Register now and access more than 125,000 products
- For safe and optimum loosening for almost every clamping task
Datasheets(X)
Clamp levers are used when the clamping area is limited or a particular tension setting is desired. The thread insert is connected to the handle with a serrated edge and can be removed.
By lifting (pulling) the grip, the serration is freed and the clamp lever can be moved to the appropriate clamping position. On “letting go”, the grip clicks back into the place automatically.
 | |
Material of handle | PA reinforced - Polyamide reinforced |
Material of screwing thread | Steel |
Surface of the screwing thread | Burnished |
RoHS-compliant | Yes |
Design | Strengthened design |
Thread type x nominal diameter (d1) | M6 |
Shank diameter (d2) | 10 mm |
Head diameter (dk) | 14 mm |
Length of lever (l1) | 49 mm |
Height (h1) | 33.5 mm |
Head height (k) | 24.5 mm |
Radius (r1) | 42 mm |
Colour | Black |
Product weight (per item) | 16.300 g |
Thread type | Metric thread |
Last viewed
Tensioning washer DIN 6796, spring steel, plain, for screw connection
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Fully threaded hexagonal bolt and nut
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Spring cotter pin With double loop, zinc-plated steel
Sealing ring, aluminium, shape A
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Straight metric VDE single open-end wrench