S4000 plug-in nipple With male thread
Nipple with male thread, series 4000
NPL-PN-S4000-ET-G1/2IN
Register now and access more than 125,000 products
High flow rate of up to 3900 l/min and a maximum operating pressure of 16 bar
Allows optimal power delivery for compressed air consumers
Hardened steel nipples
For max. load-bearing capacity and long service life
Airtight connections
Low energy use and high efficiency
Exposed surfaces are chromium-plated, nickel-plated or galvanised.
High corrosion resistance – protected even under demanding conditions
Series 4000 fittings comply with the European Standard 10.4.
Compatibility with other compressed air fittings
Material | Steel |
Connection thread | ET G 1/2 inch |
Length (L) | 42 mm |
Surface | Zinc plated |
Width across flats (SW) | 24 mm |
Max. pressure | 16 bar |
Flow capacity | 3900 l/min |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Support clip type SRZ
Hexagon head sealing plug, short screw-in pin DIN 7604, steel, zinc-plated, blue passivated (A2K)
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Half-shell hexagon crimping insert
Conical countersink HSCo 90° with cross hole
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Stretch X jacket
Five-star bit with hole E 6.3 (1/4")
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Connection piece, 1-way For Elmo® AP damp-room switch series
