SH perforated sleeve for injection systems
Perforated sleeve SH
ANC-(SH)-PLA-TRANSP-16X130
Register now and access more than 125,000 products
Individual fixing point in masonry
- ALLROUNDER WIT-VM 250 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
- WIT-NORDIC injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
- BASIC WIT-PM 200 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
Do not use perforated sleeve SH in aerated concrete!
Datasheets(X)
CAD data (available after login)
For anchoring in solid and perforated brick masonry
Type description | SH 16 x 130 |
Diameter | 16 mm |
Length | 130 mm |
Material | Plastic |
Nominal drill-bit diameter (d 0) | 16 mm |
Drill hole depth (h 0) | 135 mm |
Effective anchoring depth (h ef) | 130 mm |
Suitable for anchor rod | M10 |
Required injection mortar | WIT-PM 200 |
Approval | ETA-13/0037 |
Last viewed
Long tray For type H and AC cable clamp
Pin with nut For screw extractor set
Knurled thumb screw, high profile
Diamond tile dry core bit M14 seat
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Twist drill bit HSS DIN 338 type RN 118°
Compression spring DIN 2095 spring steel wire, zinc-plated steel
Cylinder tapping screw, C shape with hexagon socket
Thin sheet metal screw With hexagon head and sealing washer DBS
Top-hat/support rail