SH perforated sleeve for injection systems
Perforated sleeve SH
ANC-(SH)-PLA-TRANSP-16X85
Register now and access more than 125,000 products
Individual fixing point in masonry
- ALLROUNDER WIT-VM 250 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
- WIT-NORDIC injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
- BASIC WIT-PM 200 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
Do not use perforated sleeve SH in aerated concrete!
Datasheets(X)
CAD data (available after login)
For anchoring in solid and perforated brick masonry
Type description | SH 16 x 85 |
Diameter | 16 mm |
Length | 85 mm |
Material | Plastic |
Nominal drill-bit diameter (d 0) | 16 mm |
Drill hole depth (h 0) | 90 mm |
Effective anchoring depth (h ef) | 85 mm |
Suitable for anchor rod | M10 |
Suitable for female thread sleeve | FT M6 |
Required injection mortar | WIT-PM 200, WIT-VM 250, WIT-NORDIC |
Approval | ETA-13/0037, ETA-16/0757, ETA-20/0854 |
Last viewed
Solid carbide end mill, short, twin blade
1/2 inch impact socket wrench insert hexagon, metric, short
Hexagon socket set screw with flattened tip ISO 4027, A4 stainless steel, 21H, plain
Longlife & Speed ceramic abrasive grain vulcanised fibre disc
System case empty range 8.4.1
pias® drilling screw, round head with collar and AW drive
Mini-chuck
Rust converter spray
Ceiling nail W-DN
Glove holder with snap hooks