SHARK UR plastic frame fixing with zinc plated steel countersunk head screw

Name: SHARK UR plastic frame fixing with zinc plated steel countersunk head screw
Brand: Würth
SKU: 5912810410

Plastic frame anchor SHARK UR steel zinc plated
ANC-SHARK-UR10-PLA-AW40-(A2K)-220-10X290
ZEBRA

Art.-no. 5912810410

EAN 4062856738427

All versions

Specification

Universal frame fixing with special anchor geometry and immediate load-bearing capacity with ETA assessment for over 100 building materials

Versatile application

Part of the SHARK UR product family, which has been tested for more than 100 proven and modern building materials in total as part of ETA-08/0190

The diameters 8 and 10 are tested and approved for a total of 105 different base materials

Improved safety due to expert assessment on fire behaviour in concrete and masonry

High load

Due to the anchor geometry, the teeth expand in four directions and claw into the base material

Improved load transmission through even, continuous load transfer across the entire expansion area

Virtually no spinning of the anchor sleeve due to low installation torque and expansion

Efficient installation

Minimal installation work because the anchor sleeve and special screw are pre-assembled

Embedment depths

Proof of Performance

SHARK-UR (zinc-plated steel, stainless steel): European Technical Assessment ETA-08/0190

Application area

Wooden substructures

Drill the hole

Remove drill cuttings

Check temperature of anchor sleeve

Check temperature of substrate

Install the anchor and screw with a hammer

Screw in dowel

Screw in screw until flush

Application area

The anchor can be used with a European technical assessment (ETA) for anchors in a redundant non-structural system in non-load-bearing systems (e.g. façades, suspended ceilings etc.)

Approved by ETA assessment for over 100 building materials such as various bricks, including solid and perforated bricks, hollow sand-lime and solid sand-lime blocks, solid concrete and perforated blocks, hollow lightweight concrete blocks

Suitable for normal weight concrete masonry walls such as solid brick, solid sand-lime blocks, vertically perforated brick, hollow sand-lime blocks, hollow lightweight concrete blocks, solid lightweight concrete blocks, concrete and autoclaved aerated concrete bricks

Suitable for fastening façade, ceiling and roof substructures (made of wood or steel), wooden beams, wooden laths, metal brackets, metal rails, suspended ceilings, cable conduits, angle brackets, profiles, wall-mounted cabinets, shelves etc.

The galvanised screw is suitable for use outdoors and in wet rooms (if installed carefully) provided that the screw head is sufficiently protected against moisture and driving rain. A permanently elastic sealant is recommended for protection.