SPEED cutting disc for aluminium and non-ferrous metals
CUTDISC-SP-YELL-ALU-SR-TH1,0-BR22,2-D115
Art.-no. 0664121150
EAN 4061975394521
Register now and access more than 125,000 products
- Faster and more effective due to very short cutting times
- Very thin for precise and almost burr-free cuts
- The very thin design also ensures very clean and cool cutting surfaces
- High protection against breakage
- The low effort required ensures comfortable working and is gentle on the user and the power tool
- ZEBRA quality for particularly high demands
- Store in a dry place, at 20 °C room temperature
- Always wear appropriate protective clothing while working
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure
- Always clamp cutting discs (straight design) with the metal ring towards the power tool
- For further information, please refer to the package insert
Datasheets(X)
- Suitable for aluminium, aluminium alloys and other non-ferrous metals such as copper, brass, bronze etc.
- Particularly effective at cutting thin-walled pipes and profiles (e.g. window profiles), thin metal sheets, roof coverings, roof gutters etc.
Versatility (points system) | 1 of 4 points |
Service life (points system) | 3 of 4 points |
Cutting ability (point system) | 4 of 4 points |
Handling/user-friendliness (point system) | 3 of 4 points |
Cut quality (point system) | 3 of 4 points |
Diameter x thickness | 115 x 1.0 mm |
Bore hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 13300 rpm |
Max. circumferential speed | 80 m/s |
Material to be processed | Non-ferrous metal |
Last viewed
Empty box for DIN 338 twist drill bit
Power spray glue plus
Washer ISO 7089 steel 200 HV zinc-plated thick-layer passivated with sealing (ZSM)
Interior trim clip, opened
Spare knurled screw for counter-support art. no. 071458 24
ORSY BULL series 7 top loader box
Refill for all-purpose markers for deep-hole markers
Compression spring DIN 2095 spring steel wire, zinc-plated steel
Hexagon nut with clamping piece (non-metal insert) ISO 7040, steel 10, zinc-nickel-plated, silver (ZNSHL)
Hexagon nut with clamping piece (all-metal) ISO 7042, steel, strength class 10, zinc-nickel-plated, silver (ZNSHL)