Satin-finish wheel brush Crimped stainless steel with hole
Stainless steel brush
BRSH-SST-SATNFINR-100X70X19MM
Register now and access more than 125,000 products
- Increased stability during brushing
- Crimped wire bristles support each other
- Uniform and consistent machining results due to uniform bristle arrangement
- For use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Can be used on all standard stationary drive machines and bench grinders thanks to variable bore diameters.
- Always wear safety goggles and safety gloves when working with machine brushes!
Deburring, cleaning and removal of oxide layers and paints
Diameter x width x drill hole | 100 x 70 x 19 mm |
Max. rotation speed | 8000 rpm |
Material of wire | Stainless steel |
Design | Corrugated |
Wire diameter | 0.2 mm |
Suitable for satin finisher (point system) | 4 of 4 points |
Aggressiveness | Middle |
EN standard | 1083-2 |
Datasheets(X)
Last viewed
Hexagonal bolt with shank
Securing shackle FIXB 127 With pre-assembled 27 mm nail type HN 101
Mandrel 1 For KAW 2 cable dispenser
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m
Dust extraction drill bit Plus M
WSH III 5-13 automatic welding helmet For professional welders
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Dry wall screw with double thread, collated
Rivet nut with countersunk head and knurled shank
Sealing ring, copper, shape A
