Satin-finish wheel brush Universal, crimped, with hole
Grinding bristle brush
BRSH-PLA-SATNFINR-100X70X19MM
Register now and access more than 125,000 products
- No or only a small change in the geometry of the workpiece
- The sanding bristles work not only at the tips but also on the sides, thanks to the polyamide fibres interspersed with abrasive grain
- Seamless packing to wide rollers is possible due to the special design
- For use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Deburring, cleaning, smoothing, polishing, structuring and roughing
- Smoothing of wood surfaces
Diameter x width x drill hole (DxBxA) | 100 x 70 x 19 mm |
Max. rotation speed | 8000 rpm |
Material of wire | Polyamide fibres with silicon carbide sanding grains |
Design | Corrugated |
Suitable for satin finisher (point system) | 4 of 4 points |
Aggressiveness | Middle |
EN standard | 1083-2 |
Last viewed
Centre-grooved dowel pins ISO 8742 steel plain
Submersible pump Easy-Sub 400W
Shelf support with flange
Collated nails and gas cartridge NG CS-2/3 HFB
Shim ring WN 988 A2 stainless steel plain
Grounding contact 3-way coupling with self-closing lid
Nozzle For rivet nut setting pliers HES 510
Cetus trousers
Lock washer VS A2 stainless steel
Aerated concrete anchor W-PA