Satin-finish wheel brush for wood crimped, with hole
Stranded wire brush
BRSH-STRAWRE-SATNFINR-(MS)-100X70X19MM
Register now and access more than 125,000 products
- Excellent for surface structuring work on large-scale workpieces
- Increased brushing effect
- Additional holding of the wires through the stranded construction
- For use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Can be used on all standard brush sanders.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Deburring and removal of rust and dirt
- Brushing out the soft annual rings in coniferous wood
- Roughing of the surface of hardwoods
Diameter x width x drill hole (DxBxA) | 100 x 70 x 19 mm |
Material | 0 - not applicable |
Design | Corrugated |
Wire diameter | 0.25 mm |
Aggressiveness | Hard |
Suitable for satin finisher (point system) | 4 of 4 points |
Max. rotation speed | 8000 rpm |
EN standard | 1083-2 |
Last viewed
1/4 inch bit holder, magnetic
Replacement misting spray head For REFILLO® cans
Brake pipe nipple, type E
Vulcanising cement
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Quick-action clamping nut Fixtec
TIOMOS NIGHT hinge arm cover cap
Exhaust assembly paste
Flat cover cap, for hexalobular socket and AW drive
Compartment separator For drawer cabinets