Sealing tape VKP® BASIC
Sealing tape, VKP basic
SEALTPE-(VKP-BASIC)-(20/8-14)-GREY-4,3M
VKP
Register now and access more than 125,000 products
Tested tape quality in accordance with DIN 18542-BG2
- Can be used up to a building height of 20 m
- High level of safety due to fulfilment of all BG2 test parameters
In addition to BG2: tested direct resistance to weathering and UV
- Increased safety and extended range of applications thanks to additional testing
- Prevention of complaints and cost-intensive re-working
High tape tolerance
- The tape seals reliably even with joint tolerances
- Cost saving due to the use of few tape sizes
Time-saving application
- No pre-treatment with primer is required
- No use of processing tools
Pre-compressed and self-adhesive
The pre-compressed, one-sided self-adhesive VKP Basic sealing tape seals joints reliably and permanently in a single step.
After the compression is released, the sealing tape develops a resilience that presses firmly against the joint edges and compensates for uneven areas of the joint.
Depending on the installation period, the non-adhesive side develops a slight anchoring on the adjacent building material.
Select the correct tape size:
1. Define the joint widths from the structure and classify in the "resistance to driving rain" scale
2. Then select the required tape size
3. Select the art. no. according to the tape colour
4. Define the roll quantity
The expansion speed of VKP Basic depends on the temperature. The tape's expansion behaviour is not subject to any particular specification and is based only on empirical values. The tape's reset time depends on the storage and processing temperature. The following applies: The longer the storage times and the lower the processing temperature, the longer the reset times.
In high temperatures, store the tape in a cool location; in low temperatures, store in a warm location.
** Only for installation resistant to driving rain.
Datasheets(X)
For sealing against the effects of wind, sunlight and rain and for preventing heat loss in accordance with the stipulations of the Energy Conservation Ordinance and the RAL Quality Association. Can be exposed to direct weathering.
In construction:
Expansion joints, window connections, sealing between prefabricated parts, partition walls etc.
General industry:
Container construction, air-conditioning units, machine and apparatus construction etc.
Colour | Grey |
Chemical basis | Fine open-cell polyurethane foam |
Width | 20 mm |
Min./max. joint width for watertightness in driving rain | 8-14 mm |
Length of roll | 4.3 m |
Min. resistance against driving rain (pressure)/conditions | 300 Pa / in accordance with DIN 18542-BG2 |
Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
Ultraviolet resistance | Yes, when installed to be resistant to driving rain |
Min./max. temperature resistance | -30 to 90 °C |
Shelf life from production | 18 Month |
Conditions to maintain shelf life from production | at 5°C to 25°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Flat cover cap, for hexalobular socket and AW drive
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
FLEXEN® PUR With self-seal technology
ROCKWOOL 800
1/2" socket wrench insert For TX screws, long
EPDM sealing tape Outdoors
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, Geomet
Pressure cylinder lift 117 mm
Fender flaps for lorries and trailers
Endless clamping strap Fully rounded edges