Sealing tape VKP TRIO for indoor and outdoor use
SEALTPE-RAL-(VKP-TRIO)-(66/8-15MM)-4,5M
Art.-no. 0875346608
EAN 4052712530616
Register now and access more than 125,000 products
Sealing and insulation in a single step
- Covers multiple work steps and therefore saves a lot of time
- Very easy to handle and apply
- Replaces three conventional products and therefore significantly reduces the amount of material stored
Suitable for quality-controlled installation in accordance with the German RAL quality assurance association for windows and doors
- Outside is vapour-permeable and resistant to driving rain
- The middle section provides thermal insulation
- Inside is airtight and vapour-retardant
Further advantages
- Can be installed in any weather, seals reliably in almost all weather conditions
- Harmless, since the product prevents emissions (verified by independent testing laboratory EUROFINS)
- Tape reliably compensates for substrate unevenness around the joint
- No chemical reaction at the installation site
This product is classified in accordance with EMICODE® (EC1 Plus). EMICODE® is an independent labelling system for low-emission products, based on specified test methods and limit values.
EMICODE EC1plus: Very low emission – the EMICODE classification system characterises the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.
- The expansion speed of VKP Trio depends on the temperature.
- Store in a cool location during hot weather.
- Store in a warm location during cold weather.
- Please use VKP PLUS for joints between solid components. We recommend using flexible tape or EPDM outdoor sealing tape in the bottom joint area.
- For tapes with a joint width of 12 to 20 mm and 20 to 30 mm, the tape has two layers, and the self-adhesive area is located on the wavy side (for technical reasons).
- Perform adequate tests when applying paints and sealants.
- No interactions with commercially available plastering mortar.
- The window is secured using spaced installation.
- Façade joints under a heavy load must be sealed with VKP PLUS.
- VKP TRIO is wedge-shaped. The material is thicker on the inside than on the outside. The different levels of compression ensure that a vapour diffusion gradient from inside to outside is achieved in the joint as required by the German RAL quality assurance association for windows and doors.
Datasheets(X)
- Suitable for quality-controlled installation in accordance with the requirements of the German RAL quality assurance association for windows and doors.
- For sealing window joints and door joints, connection joints between conservatories and the main building and other structural connections.
Preparation:
- Clean any loose dirt from the substrates.
- Cut off approx. 2 cm from the beginning and end of the tape.
- Allow approx. 2 cm per metre of extra length when cutting the tape to size.
Installation on windows:
- Remove the protective film from the self-adhesive strip.
- Stick the tape to the window profile.
- Make sure the positioning is correct internally and externally (white label on the inside).
Appearance in the corner area:
- The tape is butt-jointed at the corners and must be compressed longitudinally.
- Leaks must be prevented.
- If available, seal with flexible tape adhesive.
 | |
Colour | Black |
Chemical basis | Impregnated polyurethane foam |
Width | 66 mm |
Min./max. joint width for watertightness in driving rain | 8-15 mm |
Length of roll | 4.5 m |
Water-vapour diffusion resistance (description) | Inside more impermeable than outside |
Min./max. processing temperature | 5 to 25 °C |
Min./max. temperature resistance | -30 to 80 °C |
Min. resistance against driving rain (pressure)/conditions | 600 Pa / in accordance with DIN 18542-BG1 |
Building material class/conditions | B1 - Of low flammability / in accordance with DIN 4102, according to construction permit Z-56.212-3607 |
Stress group | MF1 |
Ultraviolet resistance | Yes, when compressed to be resistant to driving rain, outdoor weathering |
Heat conductance λ | 0.048 W/(m*K) |
Heat conductance λ conditions | in accordance with DIN 52612 |
Range of applications | Sealing |
Shelf life from production/conditions | 12 Month / at 20°C |
Last viewed
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, yellow chromated (A2C)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Straight pin, unhardened DIN 7, A1 stainless steel, plain
Pipe cable lug with inspection hole
Hardwood wedge
WÜRTH MODYF STRETCH X jacket
Hexalobular-type cheese head screw, low head ISO 14580, steel strength class 8.8, zinc-nickel plated, silver (ZNSHL)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Handbrush set