- For producing high-strength screw connections and other threaded connections in materials with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- The inserts are simply screwed into a pre-drilled or pre-cast hole
- Cutting effect due to sharp edges and interrupted threads of the male thread
- The front threads are bevelled for easier cutting and insertion
- The cutting slot keeps the thread inserts anchored even during strong vibrations or shaking of the workpiece.
- Chrome(VI)-free zinc thick film passivation for good corrosion protection (corrosion resistance in salt spray test according to DIN EN ISO 9227-NSS (h): 72h white rust/120 red rust)
- Applications in the entire metal and plastic processing industry
- Thread reinforcement on tools with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- For repairing torn-out threads
- Usual applications:
- For light metals and metals with a strength up to approx. 400 N/mm²
- For cast iron with hardness up to approx. 220 HB
- Plastic and fibreglass-reinforced plastic
(Tests on the original component are recommended, particularly near edges.)
 | |
Werkstoff | Steel, case-hardened |
Oberfläche | Zinc plated thick-layer passivation |
RoHS-compliant | Yes |
Thread type x nominal diameter (d) | M10 |
Länge (L) | 18 mm |
Outer diameter x pitch (D) | 14 x 1.5 mm |
Min./max. drill hole diameter | 12.7-13.4 mm |
Datasheets(X)
CAD data (available after login)
Last viewed
ABC plug-in/screw-in connector, straight
Stretch X jacket
Window frame screw AMO® III type 1
OrgaAer central lock For hanging frames and wide drawers
3/8 inch internal extractor, long
Furniture glider insert, natural glider
1/2 inch torque wrench with push-through ratchet
Replacement cap For C-tongs
DIN 7603 copper 850 pieces Sysko
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, plain
